• Thu. May 30th, 2024

Common Pool Cleaning Mistakes and How to Avoid Them

Pool Cleaning Mistakes

When you own a swimming pool, cleaning it is one of the most important tasks. If you don’t do it as often as you should, dirt and bacteria can start to build up, which will cause serious problems for your health and safety. But many people who have pools make common mistakes that can make their pool cleaning Melbourne process even harder than it needs to be. In this article, we’ll look at some of the most common errors that pool owners make when they clean their water and how you can avoid them!

Skimming and Brushing

Skimming and brushing are two of the most common pool cleaning Melbourne techniques. Skimmers are devices that remove water from your pool and filter it into a collection bag.

This type of device is often used in conjunction with a suction side cleaner, which helps to clean out any dirt or debris that your skimmer may have missed.

Brushing is another common pool cleaning technique, and this method also helps to remove dirt from the surface of your pool.

If you have a suction side cleaner attached to your skimmer, it can clean off any leaves or other debris that may have fallen into your pool while you were enjoying yourself.

Not Testing the Water

The first thing you should do when starting a pool cleaning business is to test the water. Test for pH, chlorine, alkalinity, and other things that can affect how well your equipment works. The first step in any pool cleaning job is ensuring that the water quality is good enough for you and your equipment to be at their best performance levels. You should take samples from multiple locations throughout your pool area because some areas may be more affected by contaminants than others.

Testing the Water

Improperly Cleaning the Filter

If your pool filter is not cleaned properly, it can become damaged and cause problems with the water quality in your pool. Properly cleaning the filter helps keep bacteria from growing on it, which could lead to illness or skin irritation if you swim in a dirty pool. It also helps prolong the life of your equipment by keeping it working as efficiently as possible.

Common mistakes:

  • Not cleaning the filter often enough (the recommended frequency varies depending on the manufacturer).
  • Not replacing filters when necessary.

Using Chemicals Incorrectly

The use of chemicals in the pool can be helpful, but it is important to do so correctly. Using chemicals in the wrong proportions can cause harm to humans and pets, damage pool equipment, and turn your water green.

If you use too much chlorine, the algae bloom will likely occur. When algae die off due to high amounts of chlorine or other factors like lack of sunlight or nutrients (food), it causes more toxins than usual—and those toxins have a strong smell that brings back childhood memories of being trapped under your parents’ bed with wet towels over your head!

Not Adjusting for Weather Conditions

Adjusting the water chemistry is an important part of pool maintenance. If you don’t, your pool will be subject to problems like cloudy and green water, algae growth, and corrosion.

A basic test kit can help you keep your chemicals in check. When buying a test kit, look for one that has a wide range of tests available—some basic kits only measure pH levels or chlorine/bromine levels. The more tests your kit offers, the easier it’ll be to keep an eye on everything else in your pool (like alkalinity).


As you can see, pool cleaning is a serious business. The right tools will help you get the job done faster, but it all starts with knowing what you’re doing. If something goes wrong with your pool cleaning Melbourne routine, don’t panic! There are always ways to fix it—just ensure that whatever solution you choose is safe for humans and aquatic life before implementing it.